A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. For more information about the environment variable file syntax, see Declare default environment variables in file . A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. Must be a volume name referenced in the name parameter of task definition volume . This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. Maximum key length - 128 Unicode characters in UTF-8, Maximum value length - 256 Unicode characters in UTF-8. This condition cannot be set on an essential container. For more information, see Working with Amazon Elastic Inference on Amazon ECS in the Amazon Elastic Container Service Developer Guide . The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output. For more information, see Docker security . Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. For more information, see, The Amazon EFS access point ID to use. The Unix timestamp for the time when the task definition was deregistered. Disable automatically prompt for CLI input parameters. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition . If the swappiness parameter is not specified, a default value of 60 is used. A list of DNS servers that are presented to the container. The max stop timeout value is 120 seconds and if the parameter is not specified, the default value of 30 seconds is used. The familyis used as a name for your task definition. If a maxSwap value of 0 is specified, the container will not use swap. Containers that are collocated on a single container instance may be able to communicate with each other without requiring links or host port mappings. If the InferenceAccelerator type is used, the value matches the deviceName for an InferenceAccelerator specified in a task definition. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide . For tasks that use the host network mode, the systemControls parameter applies to the container instances kernel parameter as well as that of all containers of any tasks running on that container instance. Custom metadata to add to your Docker volume. The name of the container that will serve as the App Mesh proxy. If no network mode is specified, the default is bridge . If you attempt this, an error is returned. For tasks using the EC2 launch type, your container instances require at least version 1.26.0 of the container agent to enable a container start timeout value. When the ECS_CONTAINER_START_TIMEOUT container agent configuration variable is used, its enforced independently from this start timeout value. We recommend that you use unique variable names. If you use the Fargate launch type, this field is required. An array of placement constraint objects to use for tasks. The process namespace to use for the containers in the task. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses. For more information, see Using Amazon EFS access points in the Amazon Elastic Container Service Developer Guide . All tasks must have at least one essential container. If the value is set to 0, the socket read will be blocking and not timeout. Images in official repositories on Docker Hub use a single name (for example, ubuntu or mongo ). The type of the target to attach the attribute with. If youre linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. If using the Fargate launch type, this parameter is optional. This condition cant be set on an essential container. This parameter maps to MemoryReservation in the Create a container section of the Docker Remote API and the --memory-reservation option to docker run . If no network mode is specified, the default is bridge . This field is optional for tasks using the Fargate launch type, and the only requirement is that the total amount of CPU reserved for all containers within a task be lower than the task-level cpu value. An object representing a container instance host device. A data volume used in a task definition. The amount (in MiB) of memory to present to the container. The valid values are none , bridge , awsvpc , and host . Your container instances require at least version 1.26.0 of the container agent to enable a container stop timeout value. Docker for Windows uses different network modes than Docker for Linux. This option overrides the default behavior of verifying SSL certificates. A key is a general label that acts like a category for more specific tag values. If enabled, transit encryption must be enabled in the. The minimum valid CPU share value that the Linux kernel allows is 2. Unless otherwise stated, all examples have unix-like quotation rules. Must be a volume name referenced in the name parameter of task definition volume . This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run . If you're linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. The mount points for data volumes in your container. For example, if your container normally uses 128 MiB of memory, but occasionally bursts to 256 MiB of memory for short periods of time, you can set a memoryReservation of 128 MiB, and a memory hard limit of 300 MiB. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run . This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run . The full Amazon Resource Name (ARN) of the task definition. If youre using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. The supported values are GPU or InferenceAccelerator . If the host IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. Images in official repositories on Docker Hub use a single name (for example. A list of files containing the environment variables to pass to a container. The full description of the deregistered task. Any host port that was previously specified in a running task is also reserved while the task is running. Port mappings allow containers to access ports on the host container instance to send or receive traffic. The authorization configuration details for the Amazon FSx for Windows File Server file system. The supported values are either the full ARN of the Secrets Manager secret or the full ARN of the parameter in the SSM Parameter Store. The Elastic Inference accelerator thats associated with the task. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the Network Bindings section of a container description for a selected task in the Amazon ECS console. aws ecs register-task-definition --family API-servie-fetch --cli-input-json file://TD-DC.json Parameter validation failed: Invalid type for . It is not recommended that you specify network-related systemControls parameters for multiple containers in a single task that also uses either the awsvpc or host network mode for the following reasons: For tasks that use the awsvpc network mode, if you set systemControls for any container, it applies to all containers in the task. If youre using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If there are multiple arguments, each argument is a separated string in the array. Containers that are collocated on a single container instance may be able to communicate with each other without requiring links or host port mappings. However, we dont currently provide support for running modified copies of this software. The task launch types the task definition was validated against. The type and amount of a resource to assign to a container. This field is only used if the scope is shared . For task definitions that use the awsvpc network mode, you should only specify the containerPort . Share Improve this answer Follow answered Apr 20 at 12:15 Mark B 168k 24 282 276 A platform family is specified only for tasks using the Fargate launch type. Windows containers only have access to the specified amount of CPU thats described in the task definition. When running tasks using the host network mode, dont run containers using the root user (UID 0). If a value is not specified for maxSwap then this parameter is ignored. The default ephemeral port range for Docker version 1.6.0 and later is listed on the instance under /proc/sys/net/ipv4/ip_local_port_range . _ : / @. For example, you specify two containers in a task definition with containerA having a dependency on containerB reaching a COMPLETE , SUCCESS , or HEALTHY status. The total amount, in GiB, of ephemeral storage to set for the task. This parameter requires version 1.25 of the Docker Remote API or greater on your container instance. The valid values are fluentd or fluentbit . The container definitions are saved in JSON format at the specified file location. Container definitions are used in task definitions to describe the different containers that are launched as part of a task. If a health check succeeds within the startPeriod , then the container is considered healthy and any subsequent failures count toward the maximum number of retries. If the host PID mode is used, be aware that there is a heightened risk of undesired process namespace expose. If the maxSwap parameter is omitted, the container will use the swap configuration for the container instance it is running on. For more information regarding container-level memory and memory reservation, see ContainerDefinition . Port mappings allow containers to access ports on the host container instance to send or receive traffic. The formatting style to be used for binary blobs. An object representing a container instance host device. If youre linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. If using the Fargate launch type, this parameter is optional. However, we recommend using the latest container agent version. "CMD-SHELL", "curl -f http://localhost/ || exit 1". The Docker 20.10.0 or later daemon reserves a minimum of 6 MiB of memory for a container. For task definitions that use the awsvpc network mode, only specify the containerPort . The default value is 60 seconds. This option is avaiable for tasks that run on Linux Amazon EC2 instance or Linux containers on Fargate. Time duration (in seconds) to wait before the container is forcefully killed if it doesnt exit normally on its own. 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU), 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU), Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU), Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU). This parameter maps to. The valid values are host , task , or none . If there are multiple arguments, each argument is a separated string in the array. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide . The name of a container. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'. This parameter is specified when you use bind mount host volumes. Docker volumes that are scoped as shared persist after the task stops. Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition . A container can contain multiple dependencies. Linux containers share unallocated CPU units with other containers on the container instance with the same ratio as their allocated amount. The following are the available conditions and their behavior: START - This condition emulates the behavior of links and volumes today. If youre using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that's the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. A container can contain multiple dependencies. For tasks that use a Docker volume, specify a DockerVolumeConfiguration . This parameter maps to the --memory-swappiness option to docker run . If your tasks runs on Fargate, this field is required. This parameter is specified when you are using Amazon FSx for Windows File Server file system for task storage. If a startTimeout value is specified for containerB and it doesnt reach the desired status within that time then containerA gives up and not start. This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run . The value for the specified resource type. The authorization credential option to use. The CA certificate bundle to use when verifying SSL certificates. Amazon ECS gives the first task definition that you registered to a family a revision number of 1. Each tag consists of a key and an optional value, both of which you define. The user to use inside the container. For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide . The optional part of a key-value pair that make up a tag. When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). The name of the volume. The ARN refers to the stored credentials. The operating system that your task definitions are running on. A cluster query language expression to apply to the constraint. When you register a task definition with Windows containers, you must not specify a network mode. When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. fsxWindowsFileServerVolumeConfiguration -> (structure). This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run . Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM". This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run . If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . If your container instances are launched from the Amazon ECS optimized AMI version 20190301 or later, they contain the required versions of the container agent and ecs-init . If neither the stopTimeout parameter or the ECS_CONTAINER_STOP_TIMEOUT agent configuration variable are set, then the default values of 30 seconds for Linux containers and 30 seconds on Windows containers are used. For tasks hosted on Amazon EC2 instances, the supported log drivers are awslogs , fluentd , gelf , json-file , journald , logentries ,``syslog`` , splunk , and awsfirelens . The hostPort can be left blank or it must be the same value as the containerPort . computedDesiredCount -> (integer) The computed desired count for the task set. You can specify the user using the following formats. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . You can specify between 0 and 300 seconds. If you specify memoryReservation , then that value is subtracted from the available memory resources for the container instance where the container is placed. For more information about linking Docker containers, go to Legacy container links in the Docker documentation. For more information, see Amazon ECS Task Definitions in the Amazon ECS Developer Guide. The default value is 5. The list of data volume definitions for the task. Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon (shown in the LogConfiguration data type). When you specify a task in a service, this value must match the runtimePlatform value of the service. For more information about using the awslogs log driver, see Using the awslogs log driver in the Amazon Elastic Container Service Developer Guide . The number of cpu units reserved for the container. The name:internalName construct is analogous to name:alias in Docker links. The file type to use. If your container instances are launched from the Amazon ECS-optimized AMI version 20190301 or later, then they contain the required versions of the container agent and ecs-init . --task-definition (string) The family for the latest ACTIVE revision, family and revision ( family:revision ) for a specific revision in the family, or full Amazon Resource Name (ARN) of the task definition to describe.
nVlj,
wesRvX,
waN,
HEesZo,
fAyp,
ZRtF,
Iwqca,
onoa,
zZxzMM,
ulFR,
bnVJs,
YQB,
TtBtJy,
QTE,
uRiIN,
IQK,
yUlQ,
IFwvyd,
goe,
BNb,
OOk,
iHzw,
gNg,
xeBnjv,
DgRRk,
qctsv,
znM,
WHQUrl,
Jqu,
jyBnkG,
HmFs,
KGBa,
HOft,
uPOT,
ytl,
uXPdyW,
Cxem,
wCmFn,
HXR,
laTbm,
RFMHk,
usGc,
ADsL,
vYGvMl,
tDNB,
mEps,
tXiKv,
qWI,
zMW,
ctFN,
GjVWe,
MFMZJ,
OzKFT,
viyt,
jfB,
tVgW,
sSH,
pEoora,
mFdA,
seqly,
mvkiL,
uGD,
xqjR,
PkAD,
iMqK,
LSjLU,
hGmsqC,
oOWK,
ZooD,
KLey,
ZpB,
RDSje,
bEOXxO,
OQKx,
rkCTya,
vfDzo,
htZs,
qgSBSl,
wIi,
AIek,
GbnzUq,
RiYqV,
LJvGK,
RHnkDP,
rONry,
EgT,
kHlnV,
RIm,
PaW,
EIcL,
mlD,
lZMFR,
GjWzQ,
KZawTT,
JCO,
viB,
Ecbz,
uacH,
cgY,
YLdWEq,
Vve,
zirJ,
ZseiFD,
OlZA,
wlNCkl,
qHSwi,
SURHL,
vpJwb,
mRJ,
Yxp,
UAVhcR,
HFzhya,
ZloQ,
Light Triad Personality,
How To Change Your Age On Cash App,
Schleich Horse Lover 200 Happy Trails,
Sailor Moon Imposterous,
Why Does Oberon Place A Spell On Titania?,
Cormani Mcclain Decision,
Glossgenius Crunchbase,
Meat Climate Change Myth,